Honda VFR 1200F Grab Handle Eliminator – 3D Model

• Custom Designed – Thanks to precision of 3D Scanning, The Honda VFR 1200F Grab Handle Eliminator Kit is Designed to fit your VFR1200F perfectly.

• Easy to Install – Simply remove 4 bolts and 2 screws, remove the grab handles and install the Eliminator kit using the same bolts and screws. No Modifications needed.

• Compatible with OEM seat as well as with Custom VFR1200f Seats.
• I will include 2 versions: One which is designed to be used with heat inserts(recommended) and one with a smaller diameter top hole which allows you to screw straight in to it or cut the thread wit a tap.
  Make sure you use 9.5mm tall heat inserts: [https://amzn.to/4eWD9zH]
• Note – other parts/fasteners seen on picures are Not Included.
• OEM Honda Part Numbers for refence: GRIP, L. RR. – 77340-MGE-000 ; GRIP, R. RR. – 77330-MGE-000
• Watch the quick video preview on [YouTube]

Printing instructions:

1. Material
   Matte finish ABS: https://amzn.to/3YsT4P9
2. Nozzle: 0.4mm – 4-6 walls; 0.6mm – 4 walls.
3. Supports: Yes, only under the outer lower edge.

Installation:

1. Remove the seat. There are 2 top screws attached to the grab handles which hold the side panels in place and 4 bolts holding the grab handles.
2. Remove the 2 top screws first.
3. Remove the remaining 4 bolts and the grab handles.
4. Install the Grab Handle Eliminators and reinstall all the bolts and screws.
5. Put the seat back on and Enjoy!)

If you require any custom parts designed and 3D printed feel free to drop me a message – I will be glad to help.

Feel free to browse our shop for more custom items: Our Shop

Have a Question? – Feel free to Contact Us